Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Upper oven bake mode produces no heat; the element fails to glow or reach temperature when bake cycle is activated.
Oven takes excessively long to preheat or never reaches set temperature, resulting in undercooked food.
Food bakes unevenly with hot and cold spots across the oven cavity due to partial element failure or internal burnout.
Element shows a visible break, blistered coating, or burn-through spot; may have caused a brief flash or tripped the breaker.
💡 Pro Tip: How to Confirm Your Upper Bake Element Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Upper oven will not heat at all when bake mode is selected
⚠️ Visible burn marks, blistering, or a broken spot on the element coil
⚠️ Food takes significantly longer to bake or comes out undercooked
⚠️ Oven heats unevenly — hot spots or cold zones across the cavity
Confirm failure before ordering: set your multimeter to R×1 and probe both element terminals. A healthy element reads 19–115 ohms; an open circuit (infinite resistance) or visible arcing means replacement is needed. Always shut off the circuit breaker before testing or handling the element.
📦 What's in the Box
✅ 1× Upper Oven Bake Element (1,300W/1,900W, 208V/240V, 1/4" spade terminals)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.