Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dishwasher runs full cycle but dishes — especially in the upper rack — come out dirty or with food residue. The diverter motor has failed to route water to the upper spray arm.
Dishwasher stops during operation and displays a diverter motor fault error code, indicating the motor is not responding or has seized.
A grinding, clicking, or humming noise during the wash or rinse cycle caused by a worn or damaged diverter motor gear mechanism.
Water is not being directed through the upper spray arm because the failed diverter motor is not moving the diverter disc into the correct position.
A cracked or failed diverter motor housing allows water to bypass the seal, causing leaks from the bottom of the dishwasher near the sump.
💡 Pro Tip: Is Your Diverter Motor the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dishes in the upper rack are not coming out clean even after a full wash cycle
⚠️ Dishwasher stops mid-cycle and displays a diverter motor error code
⚠️ Unusual grinding or clicking noises during the wash or rinse cycle
⚠️ Water is not rotating through the upper spray arm but lower arm appears fine
Before ordering, locate your model number on the sticker inside the dishwasher door frame. Always confirm the part number matches W11036111 or one of its listed cross-references (W11412297, W11690882, AP6980076) for guaranteed fit.
📦 What's in the Box
✅ 1× W11036111 Dishwasher Diverter Valve Motor (5.00" H x 4.00" W x 3.25" L, Black/White Plastic)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.