Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dispenser door fails to open during the wash cycle, leaving detergent or pods undissolved and dishes dirty.
Soap is not distributed at the correct cycle phase, resulting in greasy film, residue, or cloudy glassware after washing.
Broken hinge, warped housing, or failed spring mechanism prevents the dispenser cover from latching properly before a cycle.
Cracked EPDM seals or a damaged rinse aid reservoir causes rinse aid to leak into the tub prematurely rather than dispensing at the rinse phase.
Physical damage from heat stress or impact causes visible cracks in the PP housing, requiring full assembly replacement.
💡 Pro Tip: Is Your Dispenser the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Detergent pod or powder remains undissolved at the end of the wash cycle
⚠️ Dispenser door fails to open or springs back shut immediately
⚠️ Dishes come out greasy, cloudy, or with residue despite using detergent
⚠️ Visible cracks, warping, or a broken hinge on the dispenser cover
Quick test: Run a short cycle and pause mid-wash — open the door carefully and check if the dispenser flap has opened. If it hasn't, the solenoid or spring mechanism has failed and replacement is needed.
📦 What's in the Box
✅ 1× DD59-01003A Detergent & Rinse Aid Dispenser Assembly (PP housing, copper solenoid, EPDM seals, PA lever)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.