5300622034 Dryer Heating Element Restring Coil Compatible with Frigidaire Kenmore Gibson Tappan, Replaces AP2135128 PS451032 AH451032 EA451032

💡 Pro Tip: How to Diagnose a Failed Dryer Heating Element

Your part is likely the culprit if you notice any of the following:

⚠️ Dryer runs normally but produces no heat — drum spins, timer counts down, but clothes stay wet

⚠️ Clothes take two or more cycles to dry — element generating insufficient heat

⚠️ No warm air from the exhaust vent despite the dryer running

⚠️ Dryer overheats continuously — element shorted against the housing causing runaway heat

🔬 Diagnosis tip: Disconnect power and use a multimeter set to continuity/Ohms across the two element terminals. A good coil reads closed (continuity). Open = broken coil, replace it. Also test each terminal to the metal housing — any continuity there means the coil is shorted to ground and must be replaced immediately to avoid a fire hazard.