





Fresh-food compartment does not reach set temperature because the failed motor can no longer circulate cold air from the evaporator into the fridge section.
Motor failure stops airflow across evaporator coils, causing the freezer temperature to rise and food to thaw.
Worn motor bearings or debris-obstructed blades produce grinding, rattling, or high-pitched squealing noise from behind the freezer back panel.
Without proper airflow the evaporator coils ice over rapidly, leading to heavy frost accumulation on freezer walls and blocked vents.
Compressor runs non-stop trying to compensate for poor cooling caused by a seized or under-performing evaporator fan motor.





💡 Pro Tip: Is Your Evaporator Fan Motor the Culprit?
Your part is likely the culprit if you notice any of the following:
⚠️ Refrigerator fresh-food section is too warm while freezer still cools
⚠️ Unusual grinding, rattling, or squealing noise from behind the freezer back panel
⚠️ Excessive frost buildup on the evaporator coils or freezer walls
⚠️ Refrigerator runs continuously but never reaches set temperature
🛠 Quick test: Open the freezer door, manually hold the door switch closed (if accessible), and listen for the fan. No spin or abnormal noise = motor failure. Also confirm the defrost heater is functional before ordering to rule out a secondary cause.
📦 What's in the Box
✅ 1× Evaporator Fan Motor 242077702 (115V / 60Hz / 2.5W) with 3-Wire Harness
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.