Whirlpool & Maytag Washer Lid Strike Parts — Models & Compatibility

Your washer lid won't latch, or the machine refuses to start even though you've closed it three times. That's usually the lid strike — the small plastic catch on the washer tub that engages with the lid lock mechanism. This hub covers the W10837741 replacement lid strike compatible with Whirlpool, Maytag, Kenmore, Amana, and Crosley top-load washers across multiple series.
Is This the Right Part for Your Model?
The W10837741 lid strike fits over 100 washer models. Check your model number (located inside the washer tub rim or on the back panel near the power cord) against the compatibility list below. This part replaces older versions W10714899, AP5988753, PS11726338, and 4338531 — if those numbers appear in your service manual, this is your replacement.
About This Replacement Part
The lid strike is a small but critical component. It's the plastic catch mounted on the washer tub that the lid lock mechanism grabs when you close the lid. When it cracks or breaks — often from years of normal use or accidentally slamming the lid — the washer won't register that the lid is closed. The machine either won't start at all, or it'll drain but refuse to spin. The W10837741 is a direct-fit replacement that restores proper lid lock function without requiring any special tools or technical skill.
Compatible Whirlpool Models
- WTW5000DW1, WTW5000DW2
- WTW4816FW2
- WTW4955HW0, WTW4955HW1
- WTW4850HW0
- WTW4810EW2
- WTW4615EW2
- 7MWTW1700EM0
- 7MWTW1950EW0
Compatible Maytag Models
- MVWC565FW1, MVWC565FW2
- MVWC465HW0, MVWC465HW3
- MVWC555DW1
Cross-Brand Compatibility
This lid strike also works with Kenmore, Amana, and Crosley washers built on the same platform. If your machine shares the cabinet design with Whirlpool's top-load direct-drive models from 2010 onward, this part will fit. The strike attaches with two mounting tabs — no screws, no adhesive, just snap it into place.
What You're Getting
The W10837741 replacement includes the complete lid strike assembly with both mounting tabs intact. It's molded from durable ABS plastic designed to handle thousands of lid closures. At $18.99, it's a straightforward fix that saves you from a service call.
Installation Overview
You'll unplug the washer, lift the lid, and locate the old strike on the tub rim. Pop out the broken piece by pressing the mounting tabs inward, then snap the new strike into the same location. The entire job takes about five minutes. No disassembly of the cabinet or control panel required.
Can't find your model?
Enter your model number and we'll confirm the right part.