Whirlpool Dishwasher Diverter Motor Parts — Models & Compatibility

If your Whirlpool dishwasher isn't cleaning dishes properly or you're noticing water pooling where it shouldn't, the diverter motor is often the culprit. This component controls water flow between the upper and lower spray arms — when it fails, one rack gets soaked while the other stays bone dry. This hub covers the W10537869 diverter motor that fits over 20 Whirlpool, KitchenAid, Maytag, Kenmore, and Jenn-Air models.

Is This the Right Part for Your Model?

Check your dishwasher's model number before ordering. You'll find it on a sticker inside the door frame — open the door and look along the top or side edge. This W10537869 motor replaces AP5650272, W10476222, W10849439, and 2684962. It's a direct fit for models like WDTA50SAHZ0, WDT970SAHZ0, WDT780SAEM2, KDTE204DSS0, and KUDS01FLSS6.

About This Replacement Part

The diverter motor is a small motorized valve mounted to the circulation pump assembly. During the wash cycle, it switches water pressure between spray arm levels — upper rack for delicate items, lower rack for pots and pans. When this motor burns out or the gears strip, you'll see two distinct problems: dishes on one rack come out sparkling while the other rack looks untouched, or water leaks from the bottom of the unit because the valve isn't sealing properly. The W10537869 is an OEM-quality replacement that restores proper water distribution across both racks.

Installation Overview

Before you start, unplug the dishwasher and shut off the water supply valve under your sink. You'll need to remove the lower dish rack and spray arm to access the sump area where the motor mounts. Wear work gloves — the edges inside a dishwasher tub can be sharp, and you'll be reaching into tight spaces. The motor connects with a wire harness and typically secures with two or three screws. Most people complete this repair in 30-45 minutes once they've got the access panels off.

Compatible Model Numbers

This W10537869 diverter motor fits the following Whirlpool-family dishwashers. Your model number should match exactly — if you see a different suffix letter or number, double-check compatibility:

• WDTA50SAHZ0 (Whirlpool)
• WDT970SAHZ0 (Whirlpool)
• WDT780SAEM2 (Whirlpool)
• WDT750SAHZ0 (Whirlpool)
• WDT720PADM2 (Whirlpool)
• WDF520PADM7 (Whirlpool)
• WDT710PAYM6 (Whirlpool)
• WDT730PAHZ0 (Whirlpool)
• WDF560SAFT1 (Whirlpool)
• WDF560SAFW1 (Whirlpool)
• KDTE204DSS0 (KitchenAid)
• KUDS01FLSS6 (KitchenAid)
• KUDS35FXSSA (KitchenAid)
• KDTE334DSS0 (KitchenAid)

This part also fits select Maytag, Kenmore, and Jenn-Air models built on the same platform. If your model isn't listed here but uses the same part numbers (W10476222, W10849439, or 2684962), it's compatible.

Order Your Replacement Motor

The W10537869 diverter motor is in stock at $66.99 with fast shipping. It's a genuine OEM part that matches the original equipment in your dishwasher — no adapters or modifications needed. If you're tired of half-clean loads and mysterious leaks, this is the fix you need.