Whirlpool Front Load Washer Drum Baffle Parts — Models & Compatibility

That loud clunking sound during the spin cycle? One of your drum baffles probably cracked and broke loose. The W10283356 drum baffle keeps clothes tumbling evenly in Whirlpool, Maytag, and Amana front-load washers. When these plastic fins crack or their mounting clips shear off, you'll hear rattling and your clothes won't clean properly.

Is This the Right Part for Your Model?

Check your washer's model number before ordering. You'll find it on a sticker inside the door frame or along the top edge when you open the door. This baffle fits over 200 Whirlpool front-load models from the WFW and MHW series, plus select Maytag and Amana machines. Cross-reference your full model number with the compatibility list below to confirm fitment.

About This Replacement Part

The drum baffle (also called a lifter or paddle) is one of three or four fins mounted inside the washer drum. Its job is lifting and dropping clothes as the drum rotates, creating the tumbling action that gets your laundry clean. Original baffles crack from years of mechanical stress — the plastic fatigues where it clips onto the drum. When one breaks loose, you'll hear it banging around during cycles, and that missing paddle means uneven washing. This replacement baffle snaps into the existing mounting holes using spring-loaded clips. Most people complete the repair in under 15 minutes with just a pair of pliers to spread the clips. You don't need to disassemble the washer cabinet or remove the drum — just reach inside and pop the new baffle into place.

Compatible Whirlpool, Maytag & Amana Models

This W10283356 drum baffle works across multiple appliance brands because Whirlpool Corporation manufactures washers under several names. Below are the most common model series that use this part:

Whirlpool Front Load Washers

• WFW9410XW00
• WFW9451XW00
• WFW9470WL00, WFW9470WL01
• WFW9470WR00, WFW9470WR01
• WFW9470WW00, WFW9470WW01
• WFW9550WL10
• WFW9550WW10
• WFW9630YL00
• WFW9630YW00
• WFW9640XW00

Maytag Front Load Washers

Multiple MHW series models use this same baffle design. Check your specific model number for confirmation.

Amana Front Load Washers

Select Amana front-load models manufactured during the same production period also accept this replacement baffle.

Installation Overview

You don't need appliance repair experience to replace this part. Open the washer door, locate the broken or missing baffle inside the drum, and snap the new one into the mounting holes. The clips require a bit of pressure to seat properly — use pliers if needed to spread them slightly as you push the baffle into place. Total repair time runs about 10-15 minutes, and the washer's ready to use immediately after installation.

Why Baffles Break

The drum rotates thousands of times through every wash cycle, and each rotation flexes the baffle slightly where it clips to the drum. After years of use, that constant flexing cracks the plastic at the mounting points. Heavy loads and high-speed spin cycles accelerate the wear. Once the clips shear off, the baffle rattles loose and eventually falls into the drum. Some people discover the problem when they hear banging, others notice when they find the broken piece inside after opening the door.

Part Numbers & Cross-References

This replacement baffle supersedes and replaces these part numbers:

• WPW10283356
• AP6018619
• PS11751921
• 1552555

All these numbers reference the same physical part. Whirlpool redesigned the part slightly over the years, but the mounting system and dimensions remain identical.