Samsung Range Broil Element Parts — Models & Compatibility

If your Samsung range's broiler stopped heating or only works intermittently, the broil element is usually the culprit. This DG47-00037A replacement fits over 20 Samsung models including popular NE59J and FER series ranges. It's a direct OEM-quality replacement that restores full broiler function without the dealer markup.

Is This the Right Part for Your Model?

First, locate your model number — it's on a label inside the oven door frame or along the front frame when you open the door. Check it against our compatibility list below. This element fits Samsung ranges from the FER300, FER400, FCQ321, and NE59J series, plus others.

The broil element is the heating coil mounted to the top interior of your oven cavity. When you select the broil function, this element should glow red-hot. If it doesn't heat at all, heats unevenly, or shows visible breaks or blistering, it needs replacement.

About This Replacement Part

The DG47-00037A is Samsung's broil element for their electric ranges. It's rated at approximately 3,000-4,000 watts depending on model configuration. This element replaces several part numbers including AP4342874, PS4240835, 2087536, and EAP4240835 — if you've cross-referenced any of those numbers, this is your part.

Broil elements typically fail from thermal stress — the repeated heating and cooling cycles cause the metal coil to weaken over time. You'll notice the broiler taking longer to preheat, uneven browning on food, or complete failure to heat. Sometimes you'll see a visible crack or blister on the element surface.

Compatible Samsung Range Models

This broil element fits the following Samsung range models. If your model isn't listed but shares the same series designation, check the part number on your existing element to verify compatibility:

• FER300SB/XAB — Samsung electric range
• FER300SW/XAC — Samsung electric range
• FER300SX/XAA — Samsung electric range
• FER400SB — Samsung electric range
• FER400SW — Samsung electric range
• FER400SX — Samsung electric range
• FCQ321HTUB — Samsung electric range
• FCQ321HTUW — Samsung electric range
• FCQ321HTUX — Samsung electric range
• NE59J3420SS/AA — Samsung electric range
• NE59J3420SB/AA — Samsung electric range
• NE59J3420SW/AA — Samsung electric range
• NE59J3421SS/AA — Samsung electric range
• NE59K3310SB — Samsung electric range

Plus additional models in these series families. Always verify your model number before ordering.

Installation Overview

Replacing a broil element requires disconnecting power at the breaker, removing the mounting screws that secure the element to the oven cavity, and disconnecting the wire terminals. The new element installs in reverse order. You'll need a screwdriver and possibly a nut driver depending on your model's fastener type.

Make absolutely sure the power is off before you start — test with a voltage meter if you have one. The element terminals carry 240 volts when energized.

Why This Part Fails

Broil elements operate at extremely high temperatures — often exceeding 500°F. Over hundreds of heating cycles, the metal expands and contracts, eventually causing micro-fractures that lead to complete failure. Heavy use (frequent broiling) accelerates wear. Splattered grease can also cause hot spots that weaken the element prematurely.

If your element failed young, check your oven's ventilation. Blocked vents cause excessive heat buildup that shortens element life.

Ordering Information

This DG47-00037A broil element is priced at $161.99 and ships ready to install. It's an OEM-quality replacement that meets Samsung's original specifications. Order now to restore your range's broiling function.