Samsung Dishwasher Drain Hose Parts — Models & Compatibility

If you're dealing with water pooling under your Samsung dishwasher, there's a good chance you need this drain hose. The DD67-00059A is the factory-spec replacement that connects your dishwasher's pump to your home's drain line — and when it fails, you'll know it. This hub covers which Samsung models use this specific hose and how to verify you've got the right part before you order.

Is This the Right Part for Your Model?

Check your dishwasher's model number first — it's usually on a sticker inside the door frame along the top or side edge. Samsung model numbers typically start with "DW" or "DMT" followed by numbers and letters. Cross-reference that against the compatible models list below. This hose replaces older part numbers DD81-02331A and DD81-02636A, so if you've got an older service manual referencing those, you're in the right place.

About This Replacement Drain Hose

This drain hose is the corrugated ribbed line that runs from your dishwasher's drain pump to either your garbage disposal or dedicated drain connection under the sink. It's designed to handle hot water, detergent residue, and food particles — but over time, the connection points can crack or the hose itself can develop splits, especially if it's been kinked during installation or rubbed against cabinet edges. Leaking is the telltale symptom. You'll typically see water pooling directly under the dishwasher or dripping from the hose connection points during or right after a wash cycle. The hose measures approximately 6 feet in length and includes the necessary connection fittings for Samsung's drain pump outlet.

Compatible Samsung Dishwasher Models

This DD67-00059A drain hose fits a wide range of Samsung dishwashers, primarily from the DMT and DW series. Here are the confirmed compatible models:

• DMT400RHB/XAA — Samsung
• DMT400RHS/XAA — Samsung
• DMT400RHW/XAA — Samsung
• DMT610RHS/XAC — Samsung
• DMT800RHB/XAA — Samsung
• DMT800RHS/XAA — Samsung
• DMT800RHW/XAA — Samsung
• DW7933LRABB/AA — Samsung
• DW7933LRASR/AA — Samsung
• DW7933LRAWW/AA — Samsung
• DW80F600UTB/AA — Samsung
• DW80F600UTS/AA — Samsung
• DW80F600UTW/AA — Samsung
• DW80F800UWS/AA — Samsung
• DW80H9970US/AA — Samsung
• DW80J3020UB/AA — Samsung
• DW80J3020US/AA — Samsung
• DW80J3020UW/AA — Samsung
• DW80J7550UG/AA — Samsung
• DW80K5050UG/AA — Samsung

If your model number has a different suffix code (like /AA-01 or /AA-02), it'll still work — those suffixes just indicate minor revision updates, not parts compatibility changes.

What You Need to Know Before Ordering

Make sure you've actually got a hose problem and not a pump seal issue. Run a cycle and trace the water source carefully. If it's coming from where the hose connects to the pump or at the drain connection point, you need this hose. If water's leaking from the pump housing itself, that's a different repair. Also check that your existing hose isn't just loose — sometimes the clamp fails before the hose does, and tightening or replacing the clamp (which isn't included with this part) solves the problem for another few years.