Samsung Dryer Duct Heater Assembly Parts — Models & Compatibility

The duct heater assembly is the core heating element in your Samsung dryer — when it fails, you're left with wet clothes and a machine that runs but doesn't produce heat. This DC93-00154A replacement fits over 20 Samsung dryer models and restores full heating capacity.

Is This the Right Part for Your Model?

Before ordering, you'll need your exact model number. On Samsung dryers, look for a sticker or metal plate inside the door frame or on the back panel near the power cord. It'll start with "DV" followed by numbers and letters (like DV511AER/XAA or DV42H5600EP/A3). Cross-reference that model number with the compatibility list below — this assembly fits both standard and steam models across multiple Samsung series.

About This Replacement Part

The DC93-00154A is Samsung's OEM-spec duct heater assembly, which includes the heating coil, housing, and mounting brackets. This isn't just a heating element — it's the complete assembly that channels hot air through your dryer drum. When this component fails, the dryer will tumble normally but clothes stay damp no matter how long you run the cycle. The thermal fuse may trip repeatedly, or you might notice the drum is barely warm to the touch mid-cycle. This part replaces older part numbers AP5582094, PS4216214, 3282568, and EAP4216214, so if you've been cross-referencing those numbers, you're in the right place.

Compatible Samsung Dryer Models

This duct heater assembly works with these Samsung dryer models:

• DV511AER/XAA — Samsung
• DV511AEW/XAA — Samsung
• DV520AEP/XAA — Samsung
• DV520AEW/XAA — Samsung
• DV5451AEW/XAA — Samsung
• DV435ETGJRA/A1 — Samsung
• DV435ETGJWR/A1 — Samsung
• DV455EVGSGR/AA — Samsung
• DV455EVGSWR/AA — Samsung
• DV457EVGSGR/AA — Samsung
• DV457EVGSWR/AA — Samsung
• DV42H5600EG/A3 — Samsung
• DV42H5600EP/A3 — Samsung
• DV431AEP/XAA — Samsung
• DV431AEW/XAA — Samsung
• DV448AEE/XAA — Samsung
• DV448AEP/XAA — Samsung
• DV448AEW/XAA — Samsung
• DV456EWHDWR/AA — Samsung
• DV484ETHASU/AA — Samsung

What You're Replacing

This assembly sits at the rear of your dryer, connected to the blower housing. Air flows through the heater coils, gets heated to the right temperature, then moves into the drum. Over time — usually after thousands of cycles — the heating element develops breaks or shorts. Sometimes lint buildup around the assembly causes overheating, which trips the thermal cutoff fuse. Either way, the result is the same: no heat. Replacing the entire duct heater assembly eliminates guesswork and gets you back to fully dried laundry in one repair.