Frigidaire Oven Bake Element Parts — Models & Compatibility

If your Frigidaire oven won't heat up or the bottom element glows red only in spots, you're likely looking at a failed bake element. This hub covers the 318255101 replacement element that fits over 100 Frigidaire, Electrolux, Gibson, Tappan, and Kenmore wall ovens and ranges — including the entire FEB24S2 and FEB24S5 series. Most homeowners can replace this element in about 30 minutes with just a screwdriver and nut driver.

Is This the Right Part for Your Model?

Check your appliance's model number label before ordering. On most Frigidaire wall ovens, you'll find it on the frame visible when you open the oven door — usually upper left or right side. For ranges, check inside the storage drawer or on the back panel. This element (part number 318255101) replaces older numbers 3016246, 5303016246, 318255105, and AP3695770. If your model starts with FEB24S2, FEB24S5, PLEB30S9, or PLEF398, you're in the right place.

About This Replacement Part

The 318255101 bake element is the primary heating component in the bottom of your oven cavity. It's a heavy-duty coiled element rated for continuous high-temperature operation, typically drawing around 2500 watts at 240 volts. Most bake elements fail gradually — you'll notice uneven heating where part of the coil stays dark while other sections glow red, or the oven takes twice as long to preheat. Complete failures happen too, where the element won't heat at all. Visible blistering, cracks, or separated coils mean it's time for replacement. This direct-fit element mounts with two screws at the back wall and connects via slip-on terminals, making it one of the more straightforward oven repairs.

Compatible Frigidaire Models

This element fits these Frigidaire series and models:

• FEB24S2 Series: FEB24S2ABA, FEB24S2ABB, FEB24S2ABC, FEB24S2ABD, FEB24S2ABE, FEB24S2ABF, FEB24S2ASA, FEB24S2ASB, FEB24S2ASD
• FEB24S5 Series: FEB24S5ABB, FEB24S5ABC, FEB24S5ASB, FEB24S5ASC
• PLEB30S9 Series: Wall ovens with electronic controls
• PLEF398 Series: Freestanding electric ranges

This part also fits select Electrolux, Gibson, Tappan, and Kenmore models originally manufactured by Frigidaire. Cross-reference your model number with the compatibility list on the product page to confirm fitment.

What You'll Need for Installation

Replacing a bake element doesn't require specialized tools. You'll need a Phillips screwdriver to remove the mounting screws at the back of the oven cavity, and possibly a 1/4" nut driver if your model uses hex-head screws. Always disconnect power at the breaker before starting — ovens run on 240 volts, which is serious business. Pull the element forward carefully to access the wire terminals, disconnect them (they usually just pull off), then reverse the process with your new element. Make sure the element sits flat against the oven floor and doesn't touch the sides of the cavity.

Why Bake Elements Fail

Bake elements burn out from age and use — the metal coil expands and contracts thousands of times over years of heating cycles, eventually developing weak spots. Spills and grease dripping onto a hot element can cause localized hot spots that accelerate failure. If you've noticed your oven taking longer to preheat or baked goods coming out unevenly cooked on the bottom, check your element for dark spots, blisters, or visible breaks in the coil. Testing with a multimeter should show 15-30 ohms of resistance on a good element; infinite resistance means it's open and needs replacement.

Order Your Replacement Element

The 318255101 bake element is in stock at $115.99 with fast shipping. It's a direct OEM-quality replacement that'll get your Frigidaire oven back to proper heating performance. Verify your model number, kill the power, and you'll have hot, even baking again in under an hour.