Frigidaire & Kenmore Range Surface Burner Knob Parts — Models & Compatibility

Your range burner knob cracked, melted, or just won't turn anymore? You're looking at one of the most frequently replaced parts on Frigidaire and Kenmore ranges. This black surface burner control knob (part number 316442513) fits dozens of models across both brands, and it's the exact OEM replacement that restores proper burner control.

This hub covers compatible Kenmore 790-series ranges that use this specific knob design. Whether your knob broke off during cleaning or the internal mechanism wore out after years of daily use, you'll find your model number below.

Is This the Right Knob for Your Range?

Don't guess — verify your model number first. On most Kenmore and Frigidaire ranges, you'll find the model tag inside the warming drawer (pull it all the way out), behind the storage drawer at the bottom, or along the left side wall of the oven cavity when you open the door. Match your complete model number against the compatibility list below.

Look for the surface burner control knobs — they're the ones you turn to adjust flame height or element temperature. If your knob won't grip the valve stem anymore, has a cracked D-shaped shaft hole, or the numbers wore off, this is your replacement.

About This Replacement Burner Knob

Part 316442513 is the black surface burner control knob used across Kenmore 79000-series and compatible Frigidaire models manufactured from the mid-2000s through recent years. It replaces older part numbers AP4327071, PS2332411, 1465864, and AH2332411 — so if you see any of those numbers in your parts lookup, this knob will work.

The knob features a D-shaped shaft opening that locks onto the valve stem, with clear temperature markings from OFF through HIGH. The black finish matches factory specifications and withstands the heat generated during normal cooking operations.

Most burner knob failures happen because the plastic shaft hole wears oval-shaped over time — the knob still sits on the stem but won't turn the valve reliably. You'll notice slipping when you try to adjust temperature, or the knob spins without changing the burner setting. Heat exposure accelerates this wear, especially if you frequently use high-heat cooking methods or if grease builds up around the valve stem area.

Installation takes about two minutes per knob. The old knob pulls straight off the valve stem (no screws or clips), and the new one pushes straight on until it seats firmly. Make sure the D-shaped opening aligns with the flat sides of the valve stem — it only fits one way.

Kenmore Models Using This Knob

This replacement knob fits Kenmore ranges in the 790-series, covering both gas and electric models. The 79079-series represents their higher-capacity ranges, while the 79071-series covers standard residential models. All these ranges use the same knob design, so one part number covers multiple configurations.

Need Help Finding Your Model?

If your model number starts with 790 and you have black control knobs, there's a strong chance this part fits. Cross-reference your complete model number (including all digits after the dash) with the compatibility data below. Kenmore model numbers typically follow this format: 790.XXXXX followed by additional digits that specify color and configuration.

Can't find your model plate? Check the warranty paperwork from your original purchase — it'll list the complete model number. You can also search by your old part number if it's still legible on the back of the broken knob.