Kenmore Refrigerator Evaporator Fan Motor Parts — Models & Compatibility

If your Kenmore refrigerator isn't cooling properly or you're hearing unusual clicking sounds from the freezer compartment, the evaporator fan motor is likely your culprit. This guide covers the 3015924900 replacement motor that fits dozens of Kenmore refrigerator models, particularly those in the 1117302 series. This DC 13V 2W motor runs at 2100RPM and directly replaces part number D4612AAA36.

Is This the Right Part for Your Model?

The 3015924900 evaporator fan motor fits Kenmore refrigerators primarily in the 1117302 model series. To verify compatibility, you'll need your full model number — it's typically located inside the fresh food section on the left wall, or on the ceiling of the refrigerator compartment. Look for a white or silver label with a series of numbers starting with "11173." Cross-reference your complete model number against our compatibility list below to confirm this motor will work with your unit.

About This Replacement Part

The evaporator fan motor circulates cold air throughout your refrigerator and freezer compartments. When it fails, you'll notice the freezer gets colder than the fresh food section, or the entire unit stops cooling altogether. This 13-volt motor operates at 2 watts and spins at 2100RPM to move air across the evaporator coils. The 3015924900 is a direct-fit replacement that mounts in the same position as your original motor. It's compatible with over 50 Kenmore models, particularly those manufactured between 2010 and 2015. The motor includes the mounting bracket but you'll need to transfer the fan blade from your old motor to this new unit.

Common Signs You Need This Part

The most obvious symptom of a failed evaporator fan motor is temperature issues. Your freezer might maintain temperature while the refrigerator section runs warm, or both compartments might fail to cool properly. You might hear clicking or grinding noises coming from behind the rear freezer panel, or notice frost buildup on the back wall of the freezer. In some cases, the motor runs intermittently or stops completely, and you won't feel any air movement when you open the freezer door. If you've already confirmed your compressor is running but you're still not getting proper cooling, this motor is the next component to check.

Compatible Kenmore Refrigerator Models

This evaporator fan motor works with the following Kenmore models. If your model number isn't listed, contact us with your complete model and serial number for verification:

• 11173027711 — Kenmore
• 11173027710 — Kenmore
• 11173027713 — Kenmore
• 11173022120 — Kenmore
• 11173022020 — Kenmore
• 11173022710 — Kenmore
• 11173022711 — Kenmore
• 11173022712 — Kenmore
• 11173022713 — Kenmore
• 11173025020 — Kenmore
• 11173025120 — Kenmore
• 11173025710 — Kenmore
• 11173025711 — Kenmore
• 11173025712 — Kenmore
• 11173025713 — Kenmore

Installation Overview

Replacing the evaporator fan motor requires accessing the freezer's rear panel. You'll need to unplug the refrigerator and remove all freezer contents and shelves. The rear panel is typically held by several screws along the edges. Once you've removed the panel, you'll see the evaporator coils and the fan motor mounted behind them. Disconnect the wire harness, remove the mounting screws, and transfer the fan blade to the new motor. The entire process takes about 45 minutes if you're careful and methodical. Make sure to let any frost melt completely before working on the evaporator area — it makes the job much easier.

Technical Specifications

• Voltage: DC 13V
• Wattage: 2W
• Speed: 2100 RPM
• Replaces: D4612AAA36
• Part Number: 3015924900
• Price: $41.99

Order Your Replacement Motor

The 3015924900 evaporator fan motor is in stock and ready to ship. Each motor is tested before shipping to ensure it meets OEM specifications. If you're not sure this is the right part for your specific model, our parts specialists can help you verify compatibility — just have your model and serial number ready when you call.