Frigidaire Electrolux Kenmore Refrigerator Door Bin Parts — Models & Compatibility

If you're staring at a cracked door bin in your Frigidaire, Electrolux, or Kenmore side-by-side, you're not alone. The shelf connector cracks and breaks off — it's one of those wear-and-tear failures that catches you by surprise when a gallon of milk won't stay put anymore. This hub covers the 240323002 bottom door bin replacement, which fits over 20 different model numbers across these three brands.

This is the lower door bin, typically the one that takes the most abuse from heavy bottles and jug handles. You'll find the exact part number printed on the original bin, and installation is literally snap-and-done — no tools, no adjustments.

Is This the Right Part for Your Model?

Check your refrigerator's model and serial number tag, usually located inside the fresh food compartment along the left or right wall. Cross-reference that model number with the compatible list below. If you bought a house and the bins were already missing (happens more often than you'd think), the serial number is your best friend. For example, serial 4A23016267 uses part 240323002 for the two lower right-hand door bins.

About This Replacement Part

Part number 240323002 replaces several obsolete numbers including AP2115742, PS429725, 240323005, and 240323006. It's a direct OEM-style replacement that works across Frigidaire's side-by-side lineup and their rebadged Electrolux and Kenmore equivalents. The bin snaps directly onto the door — users report taking it out of the box and clicking it in without even reading instructions. The entire swap takes under 15 minutes, mostly because you'll spend 10 of those cleaning out the door before you install the new bin.

Common Issues This Part Fixes

Beyond the obvious cracked connector problem, this replacement solves door bins that rattle, won't stay level, or have developed stress cracks around the mounting points. Some customers also report the bin refusing to close properly because the broken shelf connector prevents the door from sealing. If your refrigerator's been noisier lately or the door doesn't sit flush, check those lower bins first.

Installation Overview

No toolkit required. Pull the old bin straight out (it'll slide off the broken connector tabs), clean the door mounting area, then align the new bin's connector slots with the door posts and press until you hear it click. That's it. One user said it best: "Took the part out of the box. Snapped it into the bin!" If it doesn't snap easily, you're probably hitting it at a slight angle — back it out and try again straight-on.

Model Compatibility List

This replacement fits a wide range of Frigidaire, Electrolux, and Kenmore side-by-side refrigerators. Below are the most common model series covered by part 240323002. Always verify your specific model number before ordering.