OEM vs Aftermarket W10542314 Dishwasher Door Gasket: Honest Comparison (Whirlpool/KitchenAid)

You've got a puddle on your kitchen floor after every wash cycle. Your WDF510PAYS6 or GU2475XTVY1 is leaking from the door, and you've traced it to that worn-out gasket. Now you're staring at two options: a $120+ OEM gasket from Whirlpool, or a $51.99 aftermarket replacement. That's a $70 difference for what's essentially a rubber seal.

Let's cut through the marketing and look at what you're actually getting with each option.

Quick Answer

For this specific part, the aftermarket gasket delivers identical performance at less than half the price. The W10542314 replacement includes both the door gasket and strike kit — same material quality, same fit on compatible Whirlpool, KitchenAid, Maytag, and Kenmore models. Unless you're selling your house tomorrow and need that OEM label for a picky home inspector, save the $70.

Side-by-Side Comparison

When OEM Makes Sense

There are exactly two scenarios where spending double makes sense:

You're under manufacturer warranty. If your dishwasher is still covered, the OEM part might be free or heavily discounted through a warranty claim. In that case, obviously go OEM.

You're flipping a house and buyers are scrutinizing everything. Some real estate transactions get weirdly specific about "original parts." If that's your situation and the $70 premium prevents a $500 negotiation, fine.

That's it. Those are the only two reasons.

When Aftermarket Wins

Here's what actually matters with a door gasket: does it seal? The aftermarket W10542314 uses the same rubber formulation and fits the exact same groove as the original. Users report identical installation experiences:

"Removed the old gasket, cleaned gasket grove, placed new gasket in warm water then found center of new gasket... Checked for leaks with dishes in the dish washer. No leaks."

That installation process works identically for both versions. The warm water trick helps the rubber become pliable — whether it's OEM or aftermarket makes zero difference.

The aftermarket version fits models like WDT710PAYM3, WDF530PAYM3, GU2300XTVB1, and dozens of other Whirlpool family dishwashers. It stops the leaking. It allows proper door closure. It fixes the "not cleaning dishes properly" issue that happens when a worn gasket lets water escape instead of building proper spray pressure.

Installation takes 15–30 minutes either way. You'll have about an inch of gasket extending past the groove on each side — that's normal, not a defect. Let it curve toward the door center. The strike kit included with both versions ensures your door latch engages properly once the new seal is in place.

Our Verdict

Buy the aftermarket gasket. You're getting the exact same fix for $51.99 instead of $130. The only difference is the packaging label. Your dishwasher door doesn't care about branding — it cares about a rubber seal that stops water from pouring onto your floor. The aftermarket W10542314 does that job perfectly, ships faster, and comes with a better warranty. Spend the $70 savings on literally anything else.

Frequently Asked Questions

Will the aftermarket gasket fit as tightly as the OEM version?

Yes. It's manufactured to the exact AP5650274 specifications, which means it fits the same groove dimensions on your WDF510PAYS2, GU2475XTVY0, or other compatible models. The "about 1 inch extending past the groove" that users mention? That happens with both OEM and aftermarket — it's by design, not a fit issue.

How long will this gasket last compared to OEM?

The typical lifespan for either version is 3–5 years depending on use frequency and water hardness. There's no meaningful durability difference — both use similar rubber compounds designed to withstand repeated hot water exposure and detergent contact. The aftermarket version actually includes a longer warranty (1 year vs 90 days).

Can I install this myself or do I need a technician?

This is a DIY-friendly repair rated "Easy" with a 15–30 minute install time. You don't need special tools — just warm water to soften the gasket before installation. The trick is finding the center of the gasket and starting your installation at the top center of the door groove, then working your way around to the sides. If you can follow a YouTube video, you can install this gasket.