Samsung Washer Suspension Rod Kit Parts — Models & Compatibility

Your Samsung front-load washer shouldn't sound like it's trying to break free during the spin cycle. If you're hearing excessive banging, seeing the drum tilted to one side, or watching the whole machine walk across your laundry room floor, you're likely dealing with failed suspension rods. The DC97-18610F suspension rod kit is the OEM-quality replacement that keeps your washer stable — and it fits over 20 Samsung front-load models from 2016 onward.

Is This the Right Part for Your Model?

This suspension rod kit fits Samsung front-load washers with model numbers starting with WA50, WA52, and WA54. Check your model number on the sticker inside the door frame or on the back panel near the top. Common compatible models include WA50K8600AV, WA52J8700AW, WA52M7750AP, and WA54M8750AV. This kit replaces part numbers AP6243905, DC97-18610A, 4813615, and PS12085154.

About This Replacement Part

Suspension rods are what keep your washer drum balanced during high-speed spinning. Samsung's design uses four heavy-duty rods that connect the drum to the cabinet frame, absorbing vibration and preventing the drum from slamming into the cabinet walls. When these rods wear out — typically after 5-7 years of regular use — the rubber bushings deteriorate and the metal components lose their dampening ability. You'll notice it first during spin cycles with heavier loads.

The DC97-18610F is a complete four-rod kit. Samsung engineered these rods specifically for their high-efficiency front-loaders, which spin faster than traditional washers to extract more water. That means more stress on the suspension system. While you could technically replace just one failed rod, suspension components wear at similar rates. Replacing all four at once prevents having to tear into the machine again six months later when the next rod fails.

Compatible Samsung Washer Models

This suspension rod kit works with these Samsung front-load washer models:

• WA50K8600AV — 1 part
• WA50K8600AW — 1 part
• WA50M7450AP — 1 part
• WA50M7450AW — 1 part
• WA50N7350AW — 1 part
• WA50T7455AV — 1 part
• WA52J8060AW — 1 part
• WA52J8700AP — 1 part
• WA52J8700AW — 1 part
• WA52J8705MP — 1 part
• WA52J8707MP — 1 part
• WA52M7750AP — 1 part
• WA52M7750AV — 1 part
• WA52M7750AW — 1 part
• WA54M8750AV — 1 part
• WA54M8750AW — 1 part
• WA50R5200AV — 1 part
• WA50R5200AW — 1 part
• WA52A5500AV — 1 part
• WA52A5500AW — 1 part

What Makes This the Right Replacement

Samsung designed these suspension rods with specific tension ratings matched to your washer's drum weight and spin speeds. Generic aftermarket rods might fit physically, but they won't have the correct dampening characteristics. That leads to premature wear on other components — bearings, drive belts, and even the drum spider. The DC97-18610F kit includes all four rods with pre-installed bushings and mounting hardware, so you're getting exact factory specifications.

Price on genuine Samsung suspension components has come down significantly. At $44.99 for a complete four-rod kit, you're looking at roughly $11 per rod. That's competitive with generic alternatives that won't last as long or perform as well. Plus, installing all four at once means you're handling the disassembly just once — and if you've ever had the cabinet off a front-loader, you know that's worth something.

Installation Overview

Replacing suspension rods requires removing the washer's top and front panels to access the drum assembly. You'll disconnect the old rods from both the drum and cabinet mounting points, then install the new rods in reverse order. The job takes about 90 minutes if you're methodical. Most DIYers handle this repair without professional help — the hardest part is managing the weight of the drum while disconnecting the rods.

Order Your Suspension Rod Kit

The DC97-18610F suspension rod kit is in stock at $44.99 with same-day shipping on orders placed before 3 PM EST. Every kit includes all four rods, bushings, and mounting hardware. Questions about compatibility? Our parts specialists can verify fitment for your specific model number.