Samsung Refrigerator Dispenser Lever Assembly Parts — Models & Compatibility

If you're pressing the ice dispenser lever on your Samsung refrigerator and nothing's happening, the lever assembly has likely worn out or cracked. This hub covers the DA97-08519A dispenser lever assembly—a common replacement part for Samsung French door refrigerators, particularly the RF4287 and RF4289 series models.

Is This the Right Part for Your Model?

The DA97-08519A fits multiple Samsung refrigerator models, but you'll want to verify your specific model number before ordering. Your model number is typically located on the left interior wall of the fridge compartment, or inside the left door. It'll be a combination of letters and numbers like RF4287HARS or RF4289HARS. Cross-reference your model with the compatibility list below to confirm this lever assembly will work.

About This Replacement Part

The dispenser lever assembly is what activates your ice and water dispenser when you press against it with your glass. Over time, the plastic components can crack or the internal switch mechanism can fail, leaving you unable to dispense ice even though the ice maker itself works fine. The DA97-08519A assembly includes the complete lever mechanism and mounting hardware, and it replaces older part numbers including AP4578518, 2051414, and PS4175907. This is a direct OEM-compatible replacement designed specifically for Samsung French door refrigerators with external ice and water dispensers.

Common Failure: Ice Maker Won't Dispense Ice

The most common symptom owners report is the ice maker producing ice normally, but nothing happens when you press the dispenser lever. The ice bin is full, the water dispenses fine, but the ice just won't come out. This typically means the lever assembly has failed internally—either the actuator arm broke or the micro-switch stopped making contact. Replacing the entire DA97-08519A assembly solves this issue and restores full dispenser function.

Installation Overview

Replacing the dispenser lever assembly requires accessing the dispenser housing from inside the left refrigerator door. You'll need to remove the door panel trim to reach the mounting screws that hold the lever in place. The job typically takes 20-30 minutes with basic hand tools—mainly a Phillips screwdriver and possibly a putty knife to pop trim clips. Make sure to disconnect power to the refrigerator before starting any work.

Part Specifications

• Part Number: DA97-08519A
• Replaces: AP4578518, 2051414, PS4175907
• Compatible Brand: Samsung
• Price: $98.99
• Part Type: Dispenser Lever Assembly (OEM-compatible)

Compatible Samsung Models

This dispenser lever assembly works with the following Samsung refrigerator models. If your model isn't listed, check the manufacturer's parts lookup or contact support for compatibility verification.

• RF4287HARS
• RF4289HARS
• RF4287HABP
• RF4287HAWP
• LAT1000AAE
• PS4175907
• PS12345667
• PS1960673
• PS12345661
• PS3503014
• PS12739141
• PS12583750
• AP4578518
• W10549851
• W10135699
• W10501250
• W10346771A
• W11179302
• MCS62101805

Why Choose This Part?

The DA97-08519A is manufactured to OEM specifications, meaning it'll fit and function exactly like the original Samsung part. You're getting the complete lever assembly—not just the plastic lever piece—which ensures proper alignment and reliable operation. At $98.99, it's priced competitively compared to dealer parts while offering the same quality and durability you'd expect from a Samsung refrigerator component.