Maytag Dryer Lint Filter Parts — Models & Compatibility

If you've got a Maytag PYE or PYG series dryer, you know that lint filter gets a workout. This hub covers the 53-0918 lint filter replacement that fits dozens of Maytag models, plus compatible Admiral, Magic Chef, Norge, and Crosley dryers. Whether your filter's torn, warped from heat, or you just need a spare, this is your match.

Is This the Right Part for Your Model?

Check your dryer's model number — it's usually on a sticker inside the door opening or on the front panel near the lint filter slot. If you've got a PYE or PYG series Maytag (like PYE2300AYW or PYG2000AWW), this filter's a direct fit. The part replaces WP53-0918, AP6009639, and PS11742807.

About This Replacement Part

The 53-0918 is Maytag's standard lint screen assembly — the mesh filter that catches everything from dryer sheet residue to pet hair before it clogs your vent system. Over time, these filters take a beating: the plastic frame cracks from repeated handling, the screen itself gets clogged with fabric softener buildup that water alone won't clear, or the whole thing warps if something hot gets stuck against it. A damaged filter doesn't just mean lint everywhere — it forces your dryer to work harder, run hotter, and take longer to dry clothes. This replacement fits the same mounting clips as your original, drops right into the filter slot, and restores proper airflow.

Compatible Maytag Model Series

This lint filter works across Maytag's commercial-grade and residential dryer lines. The PYE series includes electric models, while PYG models are gas-powered — but they use the same filter assembly. You'll also find this part in Admiral, Magic Chef, Norge, and Crosley dryers built on the same platform.

Why Lint Filters Fail

Most people think a torn screen is the only reason to replace a filter, but buildup's the real killer. Fabric softener and dryer sheets leave a waxy film that water can't penetrate — hold your filter up to the light and try running water through it. If it beads up instead of flowing through, your filter's clogged even if it looks clean. That restricts airflow just like a torn screen would. The plastic frame also gets brittle after a few years of heat cycling, and those mounting tabs snap off when you pull the filter out. Once that happens, the filter won't seat properly and lint bypasses it entirely.

Installation Overview

Pull out the old filter, compare it to the new one to confirm the size and tab placement match, then slide the new filter into the slot until it clicks. No tools, no disassembly. Takes about ten seconds. Clean your filter after every load and deep-clean it monthly with hot soapy water and a soft brush to prevent buildup.