Whirlpool & KitchenAid Dishwasher Side Mounting Bracket Parts — Models & Compatibility

Your dishwasher door won't latch properly, or there's a noticeable gap on one side when it's supposed to be closed. That's usually your side mounting bracket failing — the metal support that secures the dishwasher to your cabinet frame. This hub covers the 8212560 replacement bracket kit, which fits over 100 Whirlpool, KitchenAid, Maytag, and Kenmore dishwasher models from the past decade.

Is This the Right Part for Your Model?

Check your dishwasher's model number first — it's typically on a sticker inside the door edge or along the top rim of the tub. This 8212560 bracket kit fits models starting with 7GU, 7WDF, 7WDT, KDFE, and KDHE series, plus many others. You'll find your specific model in the compatibility list below.

About This Replacement Part

The side mounting bracket is a simple but critical piece of hardware. It's the L-shaped metal bracket that anchors your dishwasher to the underside of your countertop or cabinet frame. When it loosens, bends, or the mounting holes strip out, your door won't align correctly — you'll see gaps, hear rattling during cycles, or the door won't seal and latch. This replacement kit includes both brackets plus the mounting screws you'll need. It's direct replacement for original part numbers AP3953705, 1201084, and PS1487167.

Compatible Dishwasher Models

This bracket fits these Whirlpool-family dishwashers:

• 7GU2300XTVQ0, 7GU2300XTVQ1 — Whirlpool built-in models
• 7WDF530PAYM3, 7WDF530PAYM4, 7WDF530PAYM5 — Whirlpool heavy-duty series
• 7GU3800XTVY6 — Whirlpool mid-range model
• 7WDT790SAYM2 — Whirlpool top control series
• KDFE304DBL2, KDFE304DSS0, KDFE304DSS1 — KitchenAid front control models
• KDFE204ESS1 — KitchenAid compact series
• KDHE704DSS0 — KitchenAid high-efficiency model

Plus dozens more from 2010-present across Whirlpool, KitchenAid, Maytag, and Kenmore lines.

Common Failure Points

Most bracket failures happen because of repeated stress from opening and closing a heavy dishwasher door thousands of times. The screw holes elongate in the cabinet wood, or the bracket itself bends if someone leaned on the open door. You'll notice the door sitting crooked or not staying closed during the wash cycle.

Installation Overview

You'll need to pull the dishwasher out slightly to access the top mounting points. Remove the old brackets, align the new ones with the cabinet frame, and secure them with the included screws. The whole job takes about 20 minutes if you've got basic hand tools. Make sure you're anchoring into solid wood, not just drywall — these brackets carry the full weight of the door.

What's Included

The 8212560 kit includes two side mounting brackets (left and right) plus mounting hardware. You're getting everything needed to secure both sides of your dishwasher properly.

Order Your Replacement Bracket

This part is in stock at $24.99 with free shipping on orders over $50. Verify your model number matches the compatibility list, then you're good to order.