Whirlpool Washer Drain Pump Parts — Models & Compatibility

Your Whirlpool front-load washer finished the wash cycle, but now it's sitting there with a tub full of water that won't drain. The W10391443 drain pump is one of the most frequently replaced components in Whirlpool's high-efficiency washer lineup, particularly in the WFW series. This hub covers compatible models, verification steps, and what you need to know before ordering.

Is This the Right Part for Your Model?

Check your washer's model number before ordering. You'll find it on a sticker inside the door frame or on the back panel near the water inlet valves. The W10391443 pump fits Whirlpool, Maytag, and Amana front-load washers manufactured between 2010-2020. Cross-reference your model number with the compatibility list below — if your model starts with WFW70, WFW80, or WFW86, this pump almost certainly fits your machine.

About This Replacement Part

The W10391443 is a direct replacement for WPW10391443, AP6020786, PS11754106, and 3020184. This pump handles drainage for Whirlpool's high-efficiency front-loaders, which cycle significantly more water than older models. When it fails, your primary symptom will be water that won't drain — the cycle completes, but you're left with standing water in the drum. The pump motor may hum without moving water, or you might hear nothing at all. Check for visible debris in the pump filter first (located behind the lower front access panel), but if the impeller spins freely and the filter's clean, the motor windings have likely failed internally.

Compatible Whirlpool Washer Models

This pump works with the following Whirlpool front-load washer series:

• WFW70HEBW series: WFW70HEBW0, WFW70HEBW1
• WFW80HEBW series: WFW80HEBW0, WFW80HEBW1
• WFW80HEBC series: WFW80HEBC0, WFW80HEBC1
• WFW8640BW series: WFW8640BW0, WFW8640BW1
• WFW8640BC series: WFW8640BC0, WFW8640BC1
• WFW86HEBW series: WFW86HEBW0, WFW86HEBW1
• WFW86HEBC series: WFW86HEBC0, WFW86HEBC1

This list represents the most common models. The full compatibility extends to 50+ model variations across Whirlpool, Maytag, and Amana brands.

Ordering Information

The W10391443 drain pump is priced at $185.99 and includes the motor assembly, housing, and mounting hardware. Verify your model number matches the compatibility list before purchasing — while this pump covers most Whirlpool front-loaders from the past decade, some newer models use a different pump design. If you're unsure, contact our parts team with your full model number for confirmation.