Frigidaire Dishwasher Orbital Sprayer Parts — Models & Compatibility

If your Frigidaire dishwasher isn't cleaning dishes properly, leaves food residue on the bottom rack, or makes strange grinding noises during the wash cycle, the orbital sprayer assembly is often the culprit. This hub covers the 5304517982 orbital sprayer replacement compatible with Frigidaire, Electrolux, Gibson, and Kenmore dishwashers — specifically the FGID and FGIP series models.

Is This the Right Part for Your Model?

The orbital sprayer (also called the mid-level spray arm or tower sprayer) sits in the middle of your dishwasher and rotates during the wash cycle to spray water upward. To verify compatibility, open your dishwasher door and check the model number on the inside edge of the door frame or along the top inner panel. If you've got an FGID2468 or FGIP2468 series dishwasher, this is your part. Cross-reference with the complete model list below — this sprayer fits 20+ variations across multiple Frigidaire product lines.

About This Replacement Part

The 5304517982 orbital sprayer assembly is a direct OEM-equivalent replacement that restores proper water distribution in your dishwasher's middle rack area. This part commonly fails when dishes aren't getting clean, particularly on the upper rack, or when you notice leaking around the center spray tower. The rotating mechanism can wear out over time, causing grinding or rattling noises during the wash cycle. If your dishwasher sounds like it's chewing gravel or leaves your coffee mugs still dirty after a full cycle, the orbital sprayer bearings have likely seized or the spray jets are clogged beyond cleaning. This assembly includes the complete spray arm tower, mounting hardware, and rotating mechanism — you're not just replacing the spray arm itself, but the entire mid-level distribution system. Replaces part numbers AP6886145, PS12717897, and EAP12717897.

Common Issues This Part Fixes

• Poor cleaning performance: Dishes on upper rack remain dirty or have food residue
• Leaking: Water pooling at the base of the dishwasher during or after cycles
• Noisy operation: Grinding, rattling, or scraping sounds during wash cycle
• Spray arm not rotating: Middle spray tower stays stationary instead of spinning

Why Frigidaire Owners Choose This Part

Frigidaire's Gallery and Professional series dishwashers rely heavily on the orbital sprayer for their wash performance — it's not just a supplementary spray arm. When this component fails, you'll notice immediately because the middle and upper racks simply don't get clean. The 5304517982 assembly is engineered to match OEM specifications, which means proper water pressure distribution and the correct rotation speed. Generic aftermarket spray arms often don't fit the mounting bracket correctly or lack the precision bearings needed for smooth operation. At $52.99, you're replacing the entire assembly rather than trying to clean or repair individual components — which rarely works long-term with orbital sprayers.

Installation Overview

You'll need to remove the lower dish rack to access the orbital sprayer assembly. The part typically twists off counterclockwise from the mounting bracket at the bottom of the tub, though some models use a clip or tab release mechanism. Before installing the new sprayer, check the mounting area for debris or hard water buildup that could affect the seal. The replacement process takes about 15 minutes for most homeowners and doesn't require any specialized tools — just your hands and maybe a flatwrap screwdriver to release any clips. Make sure the new assembly rotates freely by hand before running a test cycle.

Compatible Model Series

This orbital sprayer fits Frigidaire Gallery FGID and FGIP series dishwashers manufactured between 2015-2020. The part number 5304517982 supersedes several older part numbers and works across multiple brand names that share the same platform — including Electrolux, Gibson, and Kenmore models built on Frigidaire's chassis. Check your specific model number below to confirm fitment.