Frigidaire Refrigerator Door Shelf Retainer Bar Parts — Models & Compatibility

If your Frigidaire refrigerator door shelf keeps wobbling or the retainer bar has cracked, you're looking at one of the simplest fixes in appliance repair. The 240534901 door shelf retainer bar is that white plastic bar that secures bottles and condiments in place — and when it breaks, everything slides forward every time you open the door. This hub covers the direct-fit replacement for over 200 Frigidaire, Electrolux, Kenmore, and Gibson refrigerator models.

Is This the Right Part for Your Model?

Check your model number against the compatibility list below. You'll find your model number on a label inside the fresh food section — typically on the left or right wall, just below the top shelf. If you've got a Frigidaire FFTR series, FFHT series, or FRT series made between 2010-2020, this bar fits most configurations. The part number 240534901 replaces AP3214630, PS734935, and 948954.

About This Replacement Part

This retainer bar is the horizontal support piece that clips into the door shelf frame. It's molded from white ABS plastic with snap-fit tabs on each end — no screws, no tools. The most common failure happens when you're pulling out a heavy bottle and accidentally put upward pressure on the bar, causing the plastic tabs to crack. You'll know it's failed when the bar hangs loose on one side or falls off completely. Users report the installation takes literal seconds: "Snapped them in place in seconds" and "Removed the old one and installed the new one" are typical experiences. The repair takes under 15 minutes even if you've never done appliance work before.

Common Signs You Need This Part

Beyond the obvious broken bar, watch for these symptoms: items constantly falling forward when you open the door, the shelf feeling unstable when you place bottles in it, or visible cracks in the retainer bar plastic. Some owners also report door alignment issues or minor leaking when the shelf frame shifts due to a missing retainer bar — though leaking is rare with just this part failing.

What's Included

You're getting the white plastic retainer bar only — not the full shelf assembly. If your entire shelf is damaged or the glass insert is cracked, you'll need a different part. This is specifically for the horizontal bar that holds items in place. The part arrives ready to install with no modifications needed for any compatible model.

Installation Overview

Pull out the broken retainer bar by flexing the tabs inward slightly — it'll release from the shelf frame. Line up the new bar's tabs with the holes in the shelf frame and press firmly until you hear both sides click. That's it. No need to remove the shelf from the door. Users consistently report this as one of the easiest refrigerator repairs, with one owner noting the parts arrived "in excellent condition and fast shipping" and took seconds to swap.

Frigidaire Models Using This Part

This retainer bar fits Frigidaire top-freezer and side-by-side models across multiple series. Below are confirmed compatible models — if yours isn't listed but has the same shelf design, it'll likely fit.