GE Dryer Drum Bearing Slide Parts — Models & Compatibility

That thumping sound from your GE dryer isn't just annoying — it's your drum bearing slide wearing out. This green plastic slide (WE1M1067) supports the front of your dryer drum, and when it fails, you'll hear noise, see marks on your clothes, or find the drum won't spin at all. This hub covers the replacement bearing slide that fits over 100 GE, Hotpoint, RCA, and Kenmore dryer models.

Is This the Right Part for Your Model?

Check your dryer's model number — it's typically on a label inside the door opening or on the back panel. This bearing slide fits GE dryers in the GTDP, GTDX, DBVH, DBXR, and DBSR series, plus compatible Hotpoint and Kenmore models. The green slide replaces older part numbers WE1M481, WE1M316, AP5668531, and PS6447706. If your model number starts with any of those prefixes, you're in the right place.

About This Replacement Part

The drum bearing slide is a wear part — it's designed to create a smooth surface for your drum to glide on during rotation. Over time, the plastic wears down from friction and heat, especially if you run large loads frequently. When it fails, the most common symptom is noise during the drying cycle — a thumping, scraping, or squealing sound. Some owners also report black marks on their clothes from the worn plastic or metal-on-metal contact. In severe cases, the drum binds up completely and won't spin. One repair tech put it simply: "Perfect fit. Dryer is working. Moms happy everybody's happy." The part costs $9.99 and typically arrives within days, solving a problem that sounds expensive but really isn't.

Compatible Model Series

This bearing slide works across multiple GE dryer families, including electric and gas models. The GTDP series (Performance line), DBVH series (front-load matched sets), and DBXR series (7.0-7.4 cu ft capacity models) all use this same green slide design. Hotpoint and some Kenmore-branded GE dryers manufactured between 2010-2020 also use this part. Check the full compatibility list below to confirm your specific model number.

Common Failure Patterns

Most bearing slide failures happen after 5-8 years of regular use, though heavy usage can accelerate wear. You'll notice the symptoms gradually worsen — starting with occasional squeaks, then progressing to constant noise, and finally drum movement issues. The plastic degrades faster if lint buildup restricts airflow and increases operating temperature. If you're already replacing this slide, it's smart to clean your entire lint pathway at the same time.

Why Customers Choose This Part

"Parts arrived in a timely manner and were correct. Dryer problem solved!" That's the typical experience — straightforward ordering, accurate compatibility information, and parts that actually fix the issue. The diagrams make identification easy, and at $9.99, this is one of the most cost-effective dryer repairs you can do yourself. No special tools required, and you'll save $150-200 compared to a service call.