GE & Hotpoint Dryer Timer Knob Parts — Models & Compatibility

Your GE dryer is running fine, but you can't select the cycle you need because the timer knob is cracked, stripped, or missing entirely. This hub covers the WE1M964 timer knob replacement — a simple fix that works across hundreds of GE and Hotpoint dryer models from the GTD series to the HTX series.

This plastic control knob fits both electric and gas dryers manufactured from the mid-2000s through recent years. If you've been using pliers to turn your timer dial, this $14.99 part will get your dryer controls working properly again.

Is This the Right Part for Your Model?

The WE1M964 timer knob fits over 200 GE and Hotpoint dryer models. Your model number is located inside the dryer door opening, printed on a label on the front panel frame. Look for model numbers starting with GTD, GTDL, GTDP, HTD, or HTX followed by three digits.

This knob replaces older part numbers AP4980845, PS3487132, and 1811122. If your current knob has a D-shaped shaft opening (not round), this is your replacement.

About This Replacement Part

The WE1M964 is a white plastic timer control knob that presses onto the timer shaft on your dryer's control panel. The most common failure is simple wear — after years of daily use, the plastic teeth inside the knob strip out, causing the knob to spin freely without actually turning the timer mechanism underneath.

Other times, the knob cracks from being grabbed too forcefully or breaks off completely, leaving just the metal shaft exposed. Some owners have reported the printed cycle labels wearing off over time, though the knob still functions.

This is one of those repairs that costs more in frustration than actual money. The replacement knob simply pulls off the old shaft and pushes onto the new one — no tools required, no panel removal necessary. If your timer dial won't stay in position or you're manually rotating the metal shaft with pliers, this knob solves the problem in about 30 seconds.

Compatible GE & Hotpoint Dryer Models

This timer knob works across multiple GE and Hotpoint dryer series. The models below represent the most common series this part fits — your specific model variant may have additional letters or numbers at the end.

Installation Overview

No disassembly required for this repair. Pull the old knob straight off the timer shaft (it may require firm pressure if it's been on for years). Align the D-shaped opening on the new WE1M964 knob with the flat side of the timer shaft, then push it firmly into place until it's flush against the control panel. Test all timer positions to confirm proper engagement.

Frequently Asked Questions

Will this knob fit my Hotpoint dryer?

Yes — GE owns Hotpoint, and many models share identical timer controls. Check your model number against the compatibility list above. Most HTD and HTX series Hotpoint dryers from 2005-forward use this exact knob.

My timer still doesn't advance after replacing the knob — what's wrong?

If the new knob spins freely or the timer doesn't advance through cycles, the issue is with the timer motor mechanism itself, not the knob. You'll need to replace the complete timer assembly (a different part). The WE1M964 knob only fixes the external control — it doesn't affect the internal timer motor.

Can I use this on a gas dryer?

Absolutely. This timer knob fits both electric and gas GE/Hotpoint dryers. The timer control panel is identical across both fuel types for these model series.

Order Your Replacement Timer Knob

The WE1M964 timer knob costs $14.99 and typically ships same-day. It's a direct OEM-quality replacement that'll last another decade of daily laundry cycles. Much cheaper than calling a service tech for a 30-second repair.