Frigidaire Refrigerator Door Shelf Bin Parts — Models & Compatibility

If you've got a Frigidaire refrigerator with a broken door shelf—especially one where the locking tabs snapped off when someone yanked a gallon of milk out too hard—you're looking at the right replacement. The 240337901 door shelf bin fits over 150 Frigidaire, Electrolux, Gibson, and Kenmore refrigerator models. It's one of the most commonly replaced door components because those plastic tabs take a beating every time someone removes items without lifting them straight up.

Is This the Right Part for Your Model?

Check your refrigerator's model number plate—usually located inside the fresh food compartment on the left or right wall, or sometimes along the top. Match it against the compatible models list below. This shelf (240337901) replaces the older part numbers 240337904, 240337905, and AP2115858. If your existing shelf has cracked tabs or won't stay clipped into the door, this direct replacement snaps right into the same mounting holes.

About This Replacement Part

The 240337901 is a white plastic door bin designed for full-width placement on Frigidaire and related brand refrigerators. The most common failure? Those locking tabs break when items are pulled out at an angle instead of being lifted straight up. As one customer put it: "For some reason my son does not know how to remove items from the shelf without breaking a locking tab and having the shelf fall." The replacement shelf takes less than 15 minutes to install—you literally just snap it into place. No tools required. Just line up the mounting tabs with the holes in the door liner and press firmly until you hear it click. It's the same installation process whether you've got an FRT18S6AWA, FFHT1826LW8, or any of the Gibson GLRT series models.

Compatible Frigidaire, Electrolux & Gibson Models

This door shelf fits the following refrigerator series and models. Your specific model number should match one of these exactly:

• Frigidaire FRT Series: FRT18S6AWA, FRT18LN5BW0, FRT18L4FW3, FRT21IL4FW3, FRT21IL5DWR, FRT21S6AWH, FRT21S6AW0
• Frigidaire FFHT Series: FFHT1826LW8
• Frigidaire LFHT Series: LFHT2117LW8
• Gibson GLRT Series: GLRT183TDW8, GLRT13TEW3, GLRT182SAW5, GLRT212IDW5, GLRT13TES0

This part is confirmed compatible with over 150 additional models across Frigidaire, Electrolux, Gibson, and Kenmore brands. Verify your exact model number before ordering.

Installation & Troubleshooting

Installation is straightforward—just align the shelf tabs with the door mounting slots and press until it clicks. You'll know it's secure when you can't pull it forward without pressing the release tabs. If your new shelf won't snap in, check that old mounting tabs didn't break off inside the door holes. Sometimes a small piece of the old shelf gets stuck in there and blocks the new one from seating properly.

Why Door Shelves Break

The plastic tabs on these shelves aren't designed for lateral force. When you pull a heavy gallon jug or condiment bottle forward instead of lifting it up, the tabs flex and eventually snap. It's not a design flaw—it's just physics working against plastic. The good news? The replacement shelf is identical to the original and will last just as long if you remember to lift items straight up when removing them.