Frigidaire Refrigerator Bottom Door Bin Parts — Models & Compatibility

If your Frigidaire refrigerator's bottom door bin has cracked, lost its mounting tabs, or disappeared entirely after one too many milk jug impacts, you're looking at part number 240323001. This clear plastic bin fits the FRS6 series and several other Frigidaire side-by-side models, replacing the original bins that typically crack at the stress points near the mounting brackets.

Is This the Right Part for Your Model?

Check your refrigerator's model number — it's usually on a sticker inside the fresh food section, either on the left side wall or above the top shelf. If you've got an FRS6 series model (like FRS6HR4HW6, FRS6R4EW0, FRS6R5EMB6, or FRS6HR35K variants), this bin is your exact replacement. The part also supersedes older numbers 240323007, AP2115741, and PS429724, so if you're cross-referencing old paperwork, those all lead here.

About This Replacement Part

The 240323001 is a full-width bottom door bin designed for Frigidaire and Kenmore-branded side-by-side refrigerators. It's the largest bin in your door — the one that typically holds gallon jugs, 2-liter bottles, or condiment battalions. The bin measures approximately 18 inches wide and features two mounting tabs that snap into the door liner slots. Original bins often fail because the plastic becomes brittle over time (especially in colder climates or if the door's been slammed repeatedly), causing the tabs to break off or the front lip to crack. This replacement uses the same ABS plastic construction as the original, so installation is straightforward — just align the tabs with the slots and press firmly until you hear the click.

Compatible Frigidaire Refrigerator Models

This door bin fits the following Frigidaire and Kenmore refrigerator models:

• FRS6HR4HW6 — Frigidaire side-by-side
• FRS6R4EW0 — Frigidaire side-by-side
• FRS6R4EW2 — Frigidaire side-by-side
• FRS6R5EMB6 — Frigidaire side-by-side
• FRS6R5ESBC — Frigidaire side-by-side
• FRS6HR5JW0 — Frigidaire side-by-side
• FRS6HR35KW1 — Frigidaire side-by-side
• FRS6HR35KM0 — Frigidaire side-by-side
• FRS6HR35KM1 — Frigidaire side-by-side
• FRS6HR35KM2 — Frigidaire side-by-side
• FRS6HR35KS0 — Frigidaire side-by-side
• FRS6HR35KS2 — Frigidaire side-by-side
• FRS6HR35KB2 — Frigidaire side-by-side
• FRS6HR45K series — Multiple Frigidaire variants

If your model number starts with FRS6, there's a very good chance this bin will fit. The FRS6 platform was Frigidaire's workhorse side-by-side design for nearly a decade, and they kept parts compatibility consistent across color and trim variations.

Installation Overview

You don't need tools for this repair. Empty the old bin (if it's still attached), then pull it straight out and down to release the mounting tabs from their slots. If the tabs are broken, you might need to pry the bin away from the door liner gently with your fingers. For the new bin, start by inserting the back tabs into their upper slots, then press the front of the bin up and in until both front tabs click into place. Give it a gentle tug to confirm it's seated properly — it shouldn't come loose with normal use.

Why This Part Fails

Door bins take a beating. Every time you load a gallon of milk or a 2-liter bottle, those mounting tabs absorb stress. Over years of opening and closing the door, the plastic fatigues — especially if the bin's been overloaded or if items have been jammed in too tightly. Temperature cycling doesn't help either; the plastic expands and contracts with every defrost cycle, gradually weakening the molecular structure. Once a tab cracks, the bin can't distribute weight evenly anymore, and the remaining tabs usually fail within weeks.

Part Specifications

• Part Number: 240323001
• Replaces: 240323007, AP2115741, PS429724, 890954
• Compatible Brands: Frigidaire, Kenmore, Electrolux
• Price: $32.99
• Material: Clear ABS plastic
• Location: Refrigerator door (bottom bin position)

Order Your Replacement Door Bin

Ready to fix that broken door bin? This part typically ships within 1-2 business days, and installation takes about 30 seconds once you've got it in hand. Just make sure your model number matches the compatibility list above, and you'll be back to storing gallon jugs without worrying about plastic shrapnel in your refrigerator.