Whirlpool Dryer Door Catch Parts — Models & Compatibility

You push the dryer door closed, and it bounces right back open. Or maybe it closes, but pops open mid-cycle when the drum starts spinning. That's your door catch failing — a $10 part that's keeping your entire load of laundry from getting dry. The W10111905 door catch fits over 20 Whirlpool dryer models across multiple series, and it's one of those parts that wears out gradually until one day it just stops working.

Is This the Right Part for Your Model?

Check your dryer's model number — it's usually on a sticker inside the door opening or on the back panel. If you've got a WED6200, WED6400, WED7600, WED7800, or WED8000 series dryer, this catch is what holds your door shut. The part number W10111905 (also listed as WPW10111905, AP6015097, or PS11748369) is the direct replacement for the original equipment that came with your dryer.

About This Replacement Part

The door catch is the plastic hook mechanism mounted on the dryer door frame that engages with the door strike when you close the door. Over time, the plastic teeth wear down from repeated use — especially if you tend to push the door closed harder than necessary. When the catch becomes damaged or worn, the door won't latch properly. You'll notice the door feels loose, doesn't click securely, or won't stay closed when the dryer is running. In some cases, the catch breaks completely and the door won't close at all.

Compatible Whirlpool Dryer Series

This door catch works across multiple Whirlpool dryer series including WED6200, WED6400, WED6600, WED7600, WED7800, WED8000, WED8100, and WED8500 models. It's also compatible with select Maytag and Kenmore dryers that use the same door latch system. The compatibility spans both electric and gas dryer versions within these series.

What Causes Door Catch Failure?

Most door catch failures happen because of normal wear and tear. Every time you open and close the dryer door, the plastic catch engages with the metal strike plate. After thousands of cycles, the plastic wears down enough that it can't grip properly anymore. Sometimes the catch cracks if the door gets slammed too hard or if something impacts it while the door is open. Once the catch is worn or damaged, there's no fixing it — replacement is the only option.

Why Your Dryer Won't Run With a Bad Door Catch

Modern dryers have a door switch that prevents the dryer from starting if the door isn't fully latched. This is a safety feature — you don't want the drum spinning with the door open. When your door catch fails, the door can't engage the door strike properly, which means the door switch doesn't activate. The dryer thinks the door is open, so it won't start. Some dryers will start but stop immediately when the loose door bounces open from the drum vibration.