Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Blower wheel fins are cracked, broken, or clogged with lint, reducing air circulation through the drum and exhaust duct.
Damaged or unbalanced wheel fails to move sufficient heated air through the drum, requiring multiple cycles to dry a full load.
A missing fin or foreign object lodged in the wheel causes vibration and banging during every spin cycle.
Restricted airflow from a failed blower wheel causes heat to build up inside the cabinet, tripping the thermal cutoff.
💡 Pro Tip: Is Your Blower Wheel the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but takes 2–3 cycles to fully dry a load
⚠️ Loud rattling, clanking, or vibrating noise during operation
⚠️ Weak or no airflow at the exhaust vent
⚠️ Visible cracked, chipped, or missing fin(s) on the wheel
Diagnosis tip: Remove the back panel and air duct, then spin the motor shaft by hand. A wobbling or visibly damaged wheel confirms replacement is needed. While you have the dryer open, inspect the felt drum seals — replace them if worn to prevent future motor overload.
📦 What's in the Box
✅ 1× Dryer Blower Wheel (8-5/8" dia., ABS plastic, left-hand thread, squirrel-cage design) — motor and hardware not included
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.