Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Dryer drum spins but produces no heat — clothes remain completely wet or damp after a full drying cycle.
Dryer will not start at all with no drum movement, no interior light, and no response — indicating a blown one-shot thermal fuse.
Dryer stops mid-cycle unexpectedly before clothes are dry, indicating the high-limit thermostat is tripping prematurely due to overheating.
Dryer runs but heat output is insufficient — clothes take multiple cycles to dry, often caused by a partially failing thermostat.
Dryer cabinet, drum, or exhaust feels dangerously hot to the touch, indicating the high-limit thermostat has failed in a closed position and is not limiting temperature.
💡 Pro Tip: How to Know Your Thermal Fuse or Thermostat Has Failed
Your part is likely the culprit if you notice any of the following:
⚠️ Dryer runs but produces no heat — clothes remain damp after a full cycle
⚠️ Dryer will not start at all — no drum spin, no interior light (blown thermal fuse)
⚠️ Dryer shuts off mid-cycle unexpectedly or drying ends too soon
⚠️ Dryer runs excessively hot — clothes or cabinet feel dangerously warm
🔍 Diagnostic Tip: Use a multimeter set to continuity mode. A blown thermal fuse shows NO continuity (open circuit) and must be replaced — it is non-resettable. Always clean out the exhaust vent duct before replacing the fuse, as a lint-clogged vent is the #1 cause of thermal fuse failure. If the fuse blows again after replacement, inspect the heating element and cycling thermostat for faults.
📦 What's in the Box
✅ 1× Electric High-Limit Thermostat — 53-0771 (L248-80°F / 258°F trip temp)
✅ 1× Gas Thermal Fuse — 53-1096 (L240-30F / 240°F trip temp)
✅ 1× Gas & Electric High-Limit Thermostat — 53-1182 (L300F / 300°F trip temp)
✅ 1× Instruction Sheet
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.