Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
A bent or broken hinge shifts the door out of alignment, preventing the strike from engaging the latch — door won't stay shut during a cycle.
Broken hinge mounting tabs or failed pivot pins allow the door to sag downward under its own weight, creating a visible gap at the top of the door seal.
Complete hinge bracket failure causes the door to detach from the front panel entirely, making the washer or dryer inoperable.
Worn hinge pivot points create excessive play in the door assembly, causing rattling or grinding sounds each time the door is opened or closed.
A misaligned door caused by a damaged hinge prevents the door boot seal from seating flush against the tub, resulting in water or air leaks during operation.
💡 Pro Tip: How to Know Your Door Hinge Is Failing
Your part is likely the culprit if you notice any of the following:
⚠️ Door sags or drops when opened — hinge pins or mounting tabs are broken
⚠️ Door won't close or latch properly — hinge is bent, preventing strike alignment
⚠️ Door falls completely off the cabinet — hinge bracket has fully failed
⚠️ Excessive rattling or noise when opening/closing the door — worn hinge pivot points
🔍 Inspection tip: Lay the door flat on a soft surface and separate the inner/outer panels with a T-15 Torx bit. Inspect the hinge bracket for cracked mounting tabs or bent pivot pins — these are the most common failure points on this design. Reuse your existing 4 white plastic hinge end caps when installing the new hinge.
📦 What's in the Box
✅ 1× Front-Load Washer/Dryer Door Hinge (approx. 10" L × 1-3/4" W, metal construction)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.