Free Shipping $49+
Factory Direct No Middleman
30-Day Returns
24/7 1-800-HEIMA-00
Refrigerator runs but the freezer compartment fails to reach set temperature; inverter board unable to properly drive the compressor motor.
Compressor hums, clicks, or cycles off immediately after attempting to start due to failed inverter signal output.
The inverter board's red fault LED stays on constantly, indicating an internal inverter fault requiring board replacement.
Fresh food or freezer zone temperatures fluctuate erratically because the inverter board cannot maintain stable compressor speed.
Inverter control board shorted out following a voltage spike, causing complete loss of cooling function.
💡 Pro Tip: Is Your Inverter Board the Problem?
Your part is likely the culprit if you notice any of the following:
⚠️ Freezer stops cooling while fresh food compartment stays normal
⚠️ Compressor hums or clicks repeatedly but never fully starts
⚠️ Red LED on inverter board stays illuminated continuously
⚠️ Refrigerator runs but temperature drifts uncontrollably above setpoint
Before replacing the board, visually inspect it for burnt components, bulging capacitors, or scorch marks. Use a multimeter to confirm the inverter board is not receiving or passing the correct voltage signal to the compressor. If the compressor tests good but still won't run, the inverter board is the next suspect.
📦 What's in the Box
✅ 1× Inverter Control Board (148mm × 98.5mm, compatible with DA92-00459F / DA92-00459B)
We typically respond within 1 business day. Include your appliance model number for the fastest answer.
Disclaimer: Compatibility information, part numbers, and model fitment data on this page are sourced from manufacturer databases and third-party references. While we strive for accuracy, please verify your appliance model number before ordering. Heima is not responsible for errors or omissions in compatibility listings.
Reviews
There are no reviews yet.